HASL PCB Manufacturing
NOD Electronics has lead the PCB industry for over 25 years, providing some of the most innovative printed circuit board technologies and highest quality standards found in the industry today. You can count on us to cater to your specific needs, from the simplest boards to the most complex designs for small quantity and large scale production.
HASL stands for Hot Air Solder Leveling. The circuit boards must be immersed in a tin/lead alloy for this finish. ‘Air knives’ then remove the excess solder by blowing hot air across the surface of the board.
Our Capabilities of PCB Manufacturing
|Total Pad Size||Standard||Advanced|
|Capture Pad||Drill + 0.008||Drill + 0.006|
|Landing Pad||Drill + 0.008||Drill + 0.006|
|BC Mechanical Drill (Type III)||0.008||0.006|
|Laser Drill Size||0.004-0.010||0.0025|
|Type I Capabilities single & Double Deep||Yes||Yes|
|Type II Capabilities Buried Vias with Microvias||Yes||Yes|
|Type III Capabilities||Yes||Yes|
|Copper Filled Microvia||Yes||Yes|
|Smallest Copper Filled Microvia||0.004||0.0025|
|Copper Filled Microvia Aspect Ratio||0.75:1||1:1|
|Smallest Laser Microvia Hole Size||0.004||0.0025|
|Laser Via Aspect Ratio (Depth:Diameter)||0.75:1||1:1|
NOD Electronics is a leader in Printed Circuit Board solutions and is committed to taking an active role in working closely with our customers and suppliers to identify and rapidly eliminate hazardous substances from their products. As an ISO 9001:2000 registered company, NOD Electronics is fully supportive of electronics industry efforts throughout the world to phase out the use of lead and other undesirable elements.
TAG:   PCB Manufacturing PCB